Explorer 2in1TM Camp System


Two world-class purifier systems in one!
Explorer AND Trail Blazer Gravity System now together in one convenient package!


Demo / Details:

Product Information

Choose Your Preferred System Mode:

Explorer Mode

For fastest flowing gravity system available and maximum cartridge life. Use purifier with housing – outside of bag

Attach 4.5′ tube to hose barb of Explorer housing inlet, see flow direction arrows on Explorer housing.

Attach 2.0′ tube to hose barb of Explorer housing discharge, see flow direction arrows on Explorer housing.

Saturate the filter with water prior to use. The water does not have to be clean.

Sometimes water flow may be impaired by a vacuum in the Explorer housing. To correct this, blow air through the output tube back into the Explorer housing until the purifier element showing is full of water and all air has been purged.

  1. Make sure that the Explorer Purifier is flowing in the correct direction down from the reservoir. Follow the flow direction arrow on Explorer housing.
  2. Fill the water bag reservoir from water source.
  3. Hang water bag reservoir allow for 4.5′ of tubing between the Explorer system and the reservoir.
  4. Open clamp (by pulling grooved side from locking arm) below the Explorer system allowing water to flow through the Explorer system.
  5. Explorer system is now ready for use!

Replacing Explorer Purifier Element

  1. Remove Explorer top cap by turning it counter-clockwise 3/8″ then pull top cap up and out of Explorer filter body housing.
  2. Pull Explorer Purifier element out of Explorer body housing.
  3. Remove plastic wrapping from replacement Explorer Purifier element.
  4. Do not puncture, slice or crush Explorer Purifier element!
  5. Insert and push Explorer replacement Purifier element into Explorer housing making sure both Purifier element o-rings are fully seated in Explorer housing discharge port. Make sure key tabs and slots lock shut.
  6. Insert Explorer top cap in to Explorer housing then rotate Explorer top cap 3/8″ clockwise until tabs of Explorer top cap are fully seated in groove of Explorer body housing.
  7. Make sure Explorer top cap o-ring is not pinched or bunched up, if this occurs remove Explorer top cap and top cap 1⁄4 turn to new location on housing and reinstall. If Explorer top cap o-ring still pinches or bunches up apply a bit of petroleum jelly or lip balm to Explorer top cap o-ring and reinstall Explorer top cap as directed above.
  8. RapidPure Explorer is now ready for use!

Trail Blazer Mode

For ultra lightweight, fast gravity system weighing less than 300 Grams. Use purifier without Housing – Inside of Bag

  1. Remove plastic wrapping from Trail Blazer purifier element.
  2. Do not puncture, slice or crush Trail Blazer purifier element!
  3. Remove black wing nut and one washer from blue threaded hose barb.
  4. From inside of reservoir bag, insert purifier threaded hose barb through hole at bottom.
  5. Grab purifier threaded hose barb and pull the purifier element through the hole until the washer between the bag and Trail Blazer purifier is snug against the inside of the bag.
  6. Do not push the purifier element through as you may cause damage to it!
  7. Install washer on purifier blue threaded hose barb sliding washer tight against bottom exterior of bag.
  8. Attach wing nut to purifier threaded hose barb and tighten wing nut until washer is firm against exterior of bag. Make sure interior washer and purifier are snug against interior of bag.
  9. Hold blue threaded hose barb of purifier and attached 3/8″ hose.
  10. Pinch off hose.
  11. Fill reservior with water, hang bag and release hose pinch.
  12. Your RapidPure Trail Blazer Ultra Light Camp Water Purifying System is now ready for use!

Competitive Product Comparisons

Technology Purification
99.9999% / 6-log*
Effect Virus Reduction 99.9999%
Cyst Reduction 99.9975%
Bacteria Reduction 99.9999%

Viruses: Rotovirus, Norovirus, Hepatitus A
Bacteria E. coli, Salmonella, Dysentery
Protozoa Giardia, Cryptosporidium, Amoebae
Particulates Sediment, Silt, Sand
Chemicals Chlorine, Benzene, Chloroform
Heavy Metals Lead, Arsenic, Chromium
Output 4.1 liters per minute for industry leading performance.
Weight 18.5 oz.
Carbon Infused Yes. Providing great tasting water.
Silver Infused Yes. Kills trapped contaminants and prevents bacterial growth.
End of Life Testing Data 1,000 gallons bacteria, cyst, protozoa, giardia and 125 gallons virus.
3rd Party Tested2 Yes. Certified to exceed US EPA water purification standards.
Environmental Impact Excellent. Replace filter element only.
Freeze Resistant Yes. 3rd party certified as water purifier after initial freeze/thaw cycle and as water filter after multiple freeze/thaw cycles.
Ease of Use Simple and easy. No priming, pumping, batteries, chemicals or special maintenance.
Bag Size 9 liters
Protective Casing Yes. BPA free Zylar® housing provides rugged durability.
Replacement Cartridge Spare replacement purification cartridge included. Additional cartridges are $49.99.

1) Tap water is standardly utilized to rate the capacity of water filters/purifiers and can provide a misleading indication of actual usable filter life in the field. Real world conditions vary greatly. Our testing has found that when using the same source of water supply, RapidPure will ow faster, capture more contaminants, and will often last as long or longer than the competition.

2) BCS Laboratories is RapidPure’s 3rd party independent test lab: FL DOH Lab ID: E82924, EPA ID: FL01147. File: RapidPure 2.5 Filters Microbial Removal Efficacy Study Report: BCS1401004.docx


A water purifier protects against protozoa, bacteria AND viruses. A water filter only protects against protozoa and bacteria. All RapidPure products are certified water purifiers and meet or exceed US EPA standards.

Historically filters cost less than purifiers and are effective, if limited, at what they do. Traditional purifiers, although providing better protection than a filter, cost considerably more than filters. They are also much slower and more complicated to use, are easily clogged, and difficult to maintain. RapidPure with its’ new technology UltraCeram changes everything. Now you can purify water faster than filtering it, and as easily, as there are no chemicals, batteries, priming, pumping, or special maintenance. RapidPure purifiers offer much better value than a filter. They provide safer protection than filters, are 2 – 8 times faster, are as easy or easier to use, are priced competitively with filter systems, and can last as long or longer than filters.

Waterborne viruses, while not prevalent in North American waterways, do occur in 3rd world countries, and can quickly develop anyplace a natural or man made disaster, such as earthquakes, flooding or infrastructural damage, occurs.

YES. RapidPure purifiers are 3rd party certified to US EPA Standards to maintain full efficacy as a water purifier after a initial freeze/thaw cycle and continue to protect against Protozoa, Bacteria, AND Viruses once thawed.

After multiple freeze/thaw cycles RapidPure products still meet US EPA Standards as a water filter and will protect against Protozoa and Bacteria but full Virus protection may be compromised and the purifier cartridge should be replaced after return from the field.

Useful life will vary depending on source water conditions.

Your RapidPure Pioneer/Scout/Intrepid/Trail Blazer/Explorer Purifier Cartridge is designed to provide fast owing, effortless, easy, drinking. As the cartridge nears the end of its usefulness it will become harder to drink as it begins to load up from the pathogens and impurities it is protecting you against.

We recommend the following guidelines for changing your purification cartridge:

  1. When your RapidPure Purifier becomes noticeably slower or more difficult to drink from this is the simplest indication it’s time for a change.
  2. If using within North America, primarily as a Filter vs a Purifier, your cartridge is certified to meet or exceed EPA standards for up to 200 gallons or 750 litres for Scout/Pioneer/Intrepid. 1,000 gallons or 3750 litres for Trail Blazer/Explorer.
  3. For maximum virus reduction efficacy you should change your Pioneer/Scout/Intrepid cartridge every 100 litres or, once every 25 days of use, based on 1 gallon or 4 litres per day. For Trail Blazer/Explorer you should change the cartridge every 500 litres or 125 days of use based on 1 gallon or 4 litres per day.

It is a good habit to begin any new journey with a fresh cartridge to provide maximum protection, ensure ease of use, and provide peace of mind knowing your prepared. We also suggest to always pack a spare cartridge as source water is ever changing.

Your RapidPure Purifier has been certified to maintain its efficacy to the above volumes however overall water quality will impact actual useful life depending on the turbidity or suspended particulates in the source water.

Unlike ALL our competitors RapidPure includes a FREE spare purification cartridge with every RapidPure Explorer Camp System and Trail Blazer Ultra Light Camp System because in the real world not all water is tap water.

The Trail Blazer and Explorer spare cartridges, for extended use or higher demand situations, weigh less than 2.5 ounces. With that said, why wouldn’t you carry a spare purification cartridge in the field? Conditions are always subject-to-change. One day your water source might be a pristine lake the next a muddy river or scum laden pond. The next it drops below freezing.

Or there’s an earthquake, hurricane, flood, or a man made event, and access to potable water – once an easy flick of the wrist – is now not-so-easy. RapidPure helps you get back home – or helps you get out – by providing safe drinking water in ALL conditions, including the unexpected, wherever you are in the world.

RapidPure purifiers are not designed to work in salt water, chemically laden water, or in water temperature exceeding 100 ̊ F.


RapidPure purifiers, due to their UltraCeram technology, will process purified, not just filtered, water 2 – 8 times faster than traditional hollow fiber filters and are exponentially faster than competitive purifiers. Competitive filter products rely solely on physical restriction and are limited to a maximum pore opening of 0.2 microns to be effective against bacteria while physical purifiers are further limited to 0.02 microns openings to be effective against viruses.

RapidPure does not rely on physical opening size alone due to its’ innovative and patented design utilizing UltraCeram media for natural magnetic attraction. The RapidPure media pore size is 1.75 microns in size, versus 0.2 with filters or 0.02 microns with physical purifiers which translates to faster water flow and significantly easier drinking.


RapidPure’s innovative patented design, with UltraCeram technology, is ready for instant use and requires NO initial priming, special handling, spare parts, chemicals, batteries, special tools or special treatment for storage. Replacement cartridges are also easy to change – no tools required.

Yes. RapidPure’s UltraCeram technology processes water 2-8 times faster than traditional hollow fiber filters and is exponentially faster than competitive purifiers which have much greater restrictions in water flow.

No. RapidPure purifiers utilize Activated Carbon for automatically great tasting water.

No. RapidPure purifiers are infused with silver, a highly effective biocide, to kill any retained pathogens.

Very. Unlike many competitive products you don’t need to squeeze the bottle in order to drink.

When the RapidPure cartridge starts to reach its’ capacity water flow becomes more restricted and will eventually stop. Time to change the cartridge. RapidPure cartridges are designed as end-of-life systems and don’t need to be back flushed or require special tools to change.